Champion Global Power Equipment 100304 Manual De Instalación página 32

HOME STANDBY GENERATOR- ALL aXis CONTROLLER
Wire Land
Function
Points
Wire land #1 Ground
Wire land #2 L1
Wire land #3 N
Wire land #4 Not Connected- Empty
Wire land #5 B-
Wire land #6 B+
A 120VAC circuit must be installed for battery charging. From ATS
fuse block or distribution panel install L1 and N to Wire land # 1
and #2 respectively.
Wire Land
Function
Points
Wire land #1 N
Wire land #2 L
22-kW (MODEL 100304)
The LEDs on the battery charger indicate whether the charger has
120VAC power, if there is a battery fault and the charger state.
Battery charger rating 24 VDC 7 A.
RECOGNIZED
COMPONENT
MODEL / MODÈLE / MODELO #102652
XXXXXXX
SERIAL NO.
Certified to CSA Std. C22.2 NO.107.2
NO. DE SERIE
Conforms to UL Std.1236
N° DE SÉRIE
Artwork Notes
2mm safe margin; to be printed on White substrate.
MODELS
®
Wire Color
G (green)
P (pink)
W (white)
B (black)
R (red)
INPUT 120V - N/L
OUTPUT - CHARGER
Wire Color
W (white)
P (pink)
AUTOMATIC BATTERY CHARGER
CHARGE AUTOMATIQUE DE BATTERIE
CARGADOR DE BATERÍA AUTOMÁTICO
For use with lead acid (LA/SLA), AGM, or Gel batteries.
Not for use with Lithium-ion batteries.
Pour une utilisation avec des batteries au
plomb-acide (LA / SLA), AGM ou gel.
Ne pas utiliser avec des batteries au lithium-ion.
Para uso con baterías de plomo ácido (LA/SLA), AGM o gel.
No para uso con las baterías de iones de litio.
INPUT: 80 - 125 VAC MAX 2.7 A 50/60 Hz
ENTRÉE : 80 - 125 VCA MAX 2,7 A 50 / 60 Hz
ENTRADA: 80 - 125 VCA MAX 2.7 A 50/60 Hz
OUTPUT: 24 VDC 7 A
SORTIE : 24 VCC 7 A
SALIDA: 24 VCC 7 A
XXXXXXXXXXXX
APN 4324-L-PR Colors
Rev A
K
Size Dieline by CPEC
Revision Changes
---
LED SYMBOL
E. O.
Green
Red
Yellow
Yellow
Yellow
No Yellow
A 120 VAC circuit must be installed for battery charging. From ATS
fuse block or distribution panel install 120V circuit to the terminal
block L and N.
32
INSTALLATION
DESCRIPTION
DC Voltage Adjustment - Preset
from the factory for proper DC
charger output. No adjustments
necessary.
Enforced Output - Press to charge
battery at maximum amperage for
a short period.
Power - Lit to indicate the charger
is receiving 120 VAC and is ready
to charge.
Fault or No Charge - Lit to indicate
a battery charging problem. If this
LED is lit, the LED on the fLex
Controller , "LOW BATTERY" will
®
also be lit.
High Charge - Lit to indicate the
charger is operating above 50%
capacity. Trickle charge and mid
charge LED will also be lit.
Mid Charge - Lit to indicate the
charger is near 50% capacity.
Trickle charge LED will also be lit.
Trickle Charge - Lit to indicate the
battery is receiving a trickle charge.
Low Trickle Charge - When no
yellow LEDs are lit, the charger is in
low trickle charge state.