Southwire MAXIS MSB2000I Manual De Instrucciones página 10

2. Locate end of pendant cable and insert into pendant receptacle on back of bender.
3. Use a minimum 12/3 electrical cord up to 50 feet. Over 50-feet, use a 10/3 electrical cord.
WARNING
Extension cords:
• Up to 50-feet, use a minimum three-wire, 12 AWG extension cord with a three-prong grounding-type plug
and three-hole receptacles that accept the tool's plug. Longer than 50-feet, use a three-wire, 10 AWG
extension cord.
• Do not use extension cords that are longer than 100 ft.
• Repair or replace damaged extension cords.
10 | SOUTHWIRE.COM