Publicidad
Idiomas disponibles
Idiomas disponibles
2. Use a wrench to rotate both adjusting bolts ½ turn clockwise to INCREASE pressure or ½ turn
counterclockwise to DECREASE pressure. Be sure to adjust both bolts the same amount so that
the roller pressure is applied evenly. Measure the length of the exposed bolt and ensure that the
length is the same on both sides. Tighten the set screws.
ARROW ADJUSTMENT
The arrow on the shoe can be adjusted to compensate for variations in conduit.
1. Load the conduit into the proper shoe groove.
2. Press FWD momentarily until the shoe rotates enough so that the bottom of the conduit is fully
contacting the bottom of the hook.
3. Verify that the arrow position is aligned with 0° on the protractor scale. If necessary, loosen the hex
head bolt and adjust the arrow to align with 0°.
Retighten the hex head bolt, as shown.
16 | SOUTHWIRE.COM
Standard Squeeze Setting
Adjustment bolts
are at the same
setting
Adjustment bolts
are at different
setting
Publicidad
