Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT SAFETY INFORMATION
Pinch points:
• Keep hands away from bending
shoe, rollers, and conduit when
bender is in use.
• Support conduit when unloading.
Conduit can become loose and fall if
not properly supported.
Extension cords:
• Up to 50-feet, use a minimum three-
wire, 12 AWG extension cord with a
three-prong grounding-type plug
and three-hole receptacles that
accept the tool's plug. Longer than
50-feet, use a three-wire, 10 AWG
extension cord.
• Do not use extension cords that are
longer than 100 ft.
• Repair or replace damaged
extension cords.
• Inspect the bender before use. Replace worn,
damaged, or missing parts with Southwire replacement
parts. A damaged or improperly assembled component
could break and strike nearby personnel.
• Maintain tools with care. Keep tool clean for best and
safest performance. Follow instructions for lubricating
and changing accessories.
• Check damaged parts. Before further use of the tool,
a guard or other part that is damaged should be
carefully checked to determine that it will operate
properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other conditions
that may affect its operation. A guard or other part that
is damaged should be properly repaired or replaced.
FAILURE TO OBSERVE THESE WARNINGS COULD RESULT IN
SEVERE INJURY OR DEATH.
WARNING
WARNING
CAUTION
CAUTION
Select the appropriate shoe groove and support roller for
the type and size of conduit before bending.
• Do not bend conduit over 96 degrees. Overbending
could result in the other shoe hook colliding with the
conduit.
CAUTION
• Conduit moves rapidly as it is bent. The conduit path
must be clear of obstructions. Be sure clearance is
adequate before starting the bend.
• Wear proper apparel. Do not wear loose clothing,
gloves, neckties, rings, bracelets, or other jewelry
which may get caught in moving parts, Non-slip
footwear is recommended. Wear protective hair
covering to contain long hair.
• Do not force rollers or alter tool. It will do the job better
and safer at the rate for which it was designed.
• Use the right tool. Do not force tool or attachment to do
a job for which it was not designed.
• Use this tool for the manufacturer's intended purpose
only. Use other than that which is instructed in this
manual can result in injury or property damage.
SOUTHWIRE.COM | 5
Publicidad
