Descargar Imprimir esta página

GE Profile PFDS450 Manual Del Propietario E Instalación página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
A WARNING!
For your safety, the information
in this manual must be followed to minimize the risk
of fire or explosion, electric shock, or to prevent property damage, personal inJury, or
death.
m Do not store or use gasoline or other
flammable
vapors and liquids in the
vicinity of this or any other appliance.
m Installation
and service
must be
performed
by a qualified
installer,
service
agency
or the gas supplier.
WHAT TO DO IF YOU SMELL GAS"
[-_ Do not try to light a match,
or cigarette,
or turn on any gas or electrical
appliance.
[_ Do not touch any electrical switch; do
not use any phone in your building.
F_ Clear the room, building or area of all
occupants.
[] immediately
call your
gas supplier
from
a neighbor's
phone.
Follow
the
gas supplier's
instructions
carefully.
F-_if you cannot reach your gas supplier,
call the fire department.
California
Safe Drinking
Water and Toxic Enforcement
Act
This act requires the governor of California to publish a list of substances known to the state to cause cancer,
birth defects or other reproductive harm and requires businessesto warn customers of potential exposure to
such substances.
Gasappliances can cause minor exposure to four of these substances, namely benzene,carbon monoxide,
formaldehyde and soot, caused primarily by the incomplete combustion of natural gas or LPfuels.
Properly adjusted dryers will minimize incomplete combustion. Exposureto these substances can be minimized
further by properly venting the dryer to the outdoors.
PROPER INSTALLAWON
This dryer must be properly installed and located in accordance
with the Installation
Instructions
before it is used. Installation
Instructions
are included in the back of this manual.
[]
[]
Properly ground dryer to conform with oil governing
codes and ordinances. Follow details in Installation
Instructions.
Install or store where it will not be exposed to
temperatures below freezing or exposed to water or
weather.
[] Connect to u properly rated, protected and sized
power supply circuit to avoid electrical overload.
[] Remove all sharp packing items and dispose of all
shipping materials properly.
Exhaust/Ducting
[_] Dryers MUSTbe exhausted to the outside to prevent
large amounts of moisture and lint from being blown
into the room.
[]
Use only rigid metal 4" diameter ductwork inside the
dryer cabinet. Use only UL approved rigid metal or
flexible metal 4-in diameter ductwork for exhausting
to the outdoors. Never use plastic or other
combustible, easy-to-puncture ductwork. USE OF
PLASTIC OR OTHERCOMBUSTIBLE DUCTWORK CAN
CAUSE A FIRE. P UNCTURED DUCTWORK CAN CAUSE
A FIREIF IT COLLAPSES OR BECOMES OTHERWISE
RESTRICTED IN USEORDURINGINSTALLATION.
2
For complete details, follow the Installation Instructions.

Publicidad

loading