Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Instructions
[J] REVERSE DOOR HANDLE AND CAPS
(CONT.)
E Reassemble the outer handle to the inner handle,
using 3 screws (#8 x 0.625" tapping
screws).
Outer
handle
F Assemble
the
new
right-side
door
cap
(from
reversibility
kit), using 2 screws (#8 x 0.625" tapping
screws).
2 x D Screws
Door cap
Put the chrome cover aside on a soft, protected
flat surface.
I_1 REVERSE HINGE AND CAPS
, Lay the inner door
down
on a soft,
protected
flat surface
so that the
inner part faces
down.
Disassemble the outer window by opening 2 snaps,
lay the outer
window
on a soft, protected
flat
surface.
. Disassemble
the inner cover (mask) by opening
2 snaps,
lay the
inner cover
(mask) on a soft,
protected
flat surface.
37
[]
REVERSE HINGE AND CAPS (CONT.)
Snap \
\.
j
@
(Mask)
, Turn the inner door
on a soft , protected
flat
surface so that the inner part faces up.
, Remove
the screws,
nuts and washers
on the
opposite
side
of the
hinge,
using
a quadrex
screwdriver.
, Disassemble
the inner door cap from the inner
door by removing
2 screws (#8 x 0.75" tapping
screws).
, Disassemble
the hinge from the inner door by
removing 4 screws (#8-32 x 0.50" machine screws).
2 screws
2 nuts
2 washers
4 x E screws
Inner
cap
2xD
Publicidad
