Publicidad
Idiomas disponibles
Idiomas disponibles
EGEA TECH
2.2
GUIDE TO THE MANUAL
For the correct use of the device, the technical reference is
the "USE, INSTALLATION AND MAINTENANCE MANUAL"
supplied with it.
In order to make the instruction manual compliant with the de-
vice described therein, it was drawn up in accordance with the
Directives in force at the date of the document's edition:
• IEC/IEEE 82079-1:2019 - Preparation of information for use
(instructions for use) of products. Principles and general re-
quirements.
• ISO 7000:2019 - Graphical symbols for use on device —
Registered symbols.
• UNI EN ISO 7010:2021 - Graphic signs - Safety colours and
safety signs - Registered safety signs
Moreover, the preparation and composition of the instruction
manual complies with the principles dictated by the technical
regulations referring to the product.
The manufacturer is not liable
for any damage to things or peo-
ple caused by accidents caused
ATTENTION
by failure to comply with the in-
structions contained in this user
manual and warnings.
The "USE, INSTALLATION AND MAINTENANCE MANU-
AL" defines the purpose for which the device was built and
contains all the information necessary to ensure safe and cor-
rect installation and use.
Further technical information not reported in this manual con-
stitute an integral part of the technical file drawn up by the man-
ufacturer available at its registered office.
The constant compliance with the rules contained therein guar-
antees the safety of man and equipment, the economy of oper-
ation and a longer duration of operation.
The careful analysis carried out by the manufacturer has made
it possible to eliminate most of the risks; however, it is recom-
mended to strictly follow the instructions given in this docu-
ment.
The manufacturer is not liable
for any damage to things or peo-
ple caused by accidents caused
ATTENTION
by failure to comply with the in-
structions contained in this user
manual and warnings.
200 HT - 260 HT
cod. 3540000420 - Rev. 03 - 09/2023
2.2.1 Supply and storage of the manual
The manual is provided in paper format; however, it is available
in digital version, which can be downloaded from the website
www.ferroli.com by selecting the purchased product.
The manual must be kept for future reference until dismantling.
2.2.2 Updates
This manual reflects the technique at the time of purchase of
the device and contains the information and specifications in
force at the current date of the edition.
The manufacturer reserves the right to make modifications,
changes or improvements in the manual or on the machines,
at any time and without notice.
2.2.3 Copyright
All rights reserved.
These user instructions contain information protected by copy-
right. It is prohibited to make photocopies, duplicate, translate
or to store these user instructions on memory supports, either
in part or in whole, without previous authorisation by the suppli-
er. Any violations will be subject to compensation for damages.
All rights are reserved, including those resulting from the grant-
ing of patents or registration of a utility model.
2.2.4 Language
The manual was written in Italian (IT), the original language of
the manufacturer.
Any translations into additional languages must be made from
the original instructions.
The Manufacturer is held responsible for the information con-
tained in the original instructions; translations into different lan-
guages cannot be fully verified, therefore, if an inconsistency
is found, it is necessary to follow the original language text or
contact our Technical Documentation Office.
2.3
DECLARATION OF CONFORMITY
The CE marking certifies that the equipment meets the essen-
tial requirements of the relevant European directives and regu-
lations in force.
The declaration of conformity can be requested from the ma-
nufacturer.
EN
137
Publicidad
