Publicidad
Idiomas disponibles
Idiomas disponibles
5.1
HANDLING OF PACKAGING
The device comes in a cardboard box on a wooden pallet.
The type of packaging may vary at the discretion of the man-
ufacturer.
For unloading operations, use a forklift truck or transpallet:
these should have a capacity of at least 250 kg.
5.2
UNPACKING
The packaging material (staples,
boxes, etc.) must not left with-
in the reach of children as they
ATTENTION
pose a risk to them.
Unpacking must done carefully in order not to damage the de-
vice casing if using knives or cutters to open the cardboard
packaging.
After removing the packaging, check the integrity of the unit. In
case of doubt, do not use the device and contact an authorised
technician.
Before eliminating the packaging in accordance with current
environmental protection laws, make sure that all the accesso-
ries supplied have been removed from it.
RECYCLING / DISPOSAL.
All packaging materials must be
disposed of in accordance with
the laws in force in the country
of use.
5.3
RECEIPT
In addition to the units, the packages contain accessories and
technical documentation for use and installation.
Check that the following are present:
•
User, Installation and Maintenance Manual
•
Hexapolar digital input cable
164
EN
The packaged device
must be kept upright
during all loading op-
erations.
fig. 41
cod. 3540000420 - Rev. 03 - 09/2023
EGEA TECH
•
3x fixing brackets and relative screws
•
1x safety thermostat (only for 200 LT-S and 260 LT-S mo-
del).
For the entire period in which the device remains inactive,
pending commissioning, it is advisable to place it in a place
protected from atmospheric agents and the environmental con-
ditions indicated in paragraph "8.1 STORAGE" on page 168.
200 HT - 260 HT
Publicidad
