Delayed Start - Imesa IM6 Instrucciones De Uso

E030101C
been installed by manufacturer and may be
modified or cancelled by users. Programmes 9 to
30/50 may be programmed and installed by users.
Please see annex to check the composition of the
programmes installed by manufacturer.
In order to select one of the pre-set programmes,
please turn on the machine. Software version will
shortly appear after that the message "DOOR
OPEN" will appear.
Load linen in the drum, close door; display will
show: "SELECT PROGRAMME".
Use switches "+" and "–" to scroll the programmes
in memory.
Programmes will be shown in sequence with
programme no. and, if available, the programme
description (i.e.: programme 5 – wool). Please
refer to the appropriate paragrafer for the
description dial.
6. STARTING A PROGRAMME
After selecting, the
desplayed; at this
Programme will start and will automatically
execute the cycle sequence until the end.

7. DELAYED START

It is possibile to delay programme start. Select
programme as per §5 (for example prg 1); press
MENU to select the function of delayed start.
"DELAIED START 00.00" is desplaied; delay is
expressed in hour and minutes. Use switches "+"
and "–" to introduce the wished delay (maximum
12 hours), then push "START". "WAIT Prg. 1" is
programme number
poin press "START".
displayed together with the count-down to the
programmes start.
interrupted by pushing "STOP". In case of black
out the counting down will restart from the point it
has been interrupted.
8. READING DISPLAY
After starting a programme, display will show
continuous info on running cycles.
mot. 1
PREWASH O 1
On the first line following info may be read:
- running pre-set motor. Pls remember that
motor revolving may be pre-set in time,
(mins,
(clockwise, anti-clockwise) and rotation
speed (rpm). Running motor no. is 1.
During the spin cycle the motor kind is not
displaied as the drum is tourning only
clockwise.
- Drum revolving speed. Speed shown in
the pic. is 40 rpm sign moves to show
direction of rotation whether clockwise or
anti-clockwise
- Temperature shown in Celsius. Picture
is
shows 25°C.
water heating flashing.
- Water level in the drum in centimetres.
Picture shows 2 cms. During water
loading,
2nd line shows running programme, picture shows
prg 1. In the display appears the chosen number
programmes and eventually its comments.
3rd line shows following info:
- Running cycle: picture shows pre-wash 1
The cycles numbers and the eventual
comment alternate in the display.
- Remaning
programme: near to the symbol
by time in hours, minutes and seconds.
The machine gets the inputs and memorie
the installation conditions, for this reason
the remaining time will be correct only
after the first executions.
Cycle count-down: running cycle time
flows to zero. Count down times of all
programmes have 60 minutes.
9. SKIP & STOP
It is possibile to skip steps by pushing "+". A quick
21
Delayed start may be
40 25°
Programme 1
27:24
secs), direction
will appear during
will appear flashing.
time to complete
30/11/2003
2
of rotation
the
, goes