Imesa IM6 Instrucciones De Uso página 25

E030101C
Use "+" o "-" to move cursor in its left. Use STOP
to cancel the text underlined by the cursor.Use
"START" to activate cursor that will start to lighten.
Use "+" o "-" to implent letters or numbers in the
position the cursor is lighten. Press ENTER to
stop the cursor and fixed the chosen cipher.
Remember the name can be composed of 10
ciphers.
Completed the writing pressing "MENU" several
times, to go up in the superior menu.
18. CYCLES
Available cycles are the following 5:
- pre-wash
- wash
- rinse
- spin
- unroll (anti-wrinkle)
40 cycles max each above mentioned operation
may be implemented for a gross total of 200.
Cycles will be identified ny numbering, for
instance: pre-wash1, pre-wash2,wash1, wash40,
rinse1,rinse 36,spin3, spin33, and so on.
Some are factory installed (and may be modified)
And compose the existing library (see §30).
During programming, some steps composing the
cycle may not appear, meaning they are not
Compatible with the running cycle, for example, it
is not possibile to load detergents during spinning.
19. MODIFICATION OF AN EXISTING CYCLE
A cycle consists of a logical sequence of steps.
Modification enables to:
- cancel one of the steps in the sequence
- enter one step within the ones already present
in the sequence
- modify steps parameters (see § 21)
PLEASE NOTE THAT
affect all programmes containing that cycle.
Example 1: it is required to cancel Step 4 from
WASH4. To start programming, open door,
display shows "OPEN DOOR", press "MENU",
display shows "PASSWORD", press 6 times
"START", display shows "PROGRAMMES SET-
UP/MODIFICATION".
Use switches "+" & "-" to scroll main menu until
display shows
UP/MODIFICATION, press "ENTER".
Display shows "PRE-WASH", use switches "+" &
"-" to scroll all cycles until display shows "WASH".
Press "ENTER", display shows "WASH1", use
switches "+" & "-" to scroll stored cycles until
display shows "WASH4", press "ENTER".
Display shows "WASH4: STEP 1-DRAIN". Use
switches "+" & "-" to scroll steps until display
shows "WASH4: STEP 4 HEATING", press
"ENTER" to select it. Display shows "MODIFY".
Use "+" & "-" to scroll commands until display
shows "CANCEL", press "ENTER" to cancel step.
modifying a cycle will
"CYCLES SET-
Display shows: "STEP CANCELLED: CONFIRM?"
Press "ENTER" to confirm or "STOP" to abort
cancellation. Press then "MENU" more times to
scroll upwards to other menus.
Example 2: it is required to enter a step of
detergent loading in the cycle "WASH2". To enter
Programming, open door, display shows "DOOR
OPEN", press
"PASSWORD", press 6 times "START".
Display shows
UP/MODIFICATION".
Use "+" & "-" to scroll main menu until display
shows "CYCLES SET-UP/MODIFICATION" press
"ENTER". Display shows "PRE-WASH". Use "+" &
"-" to scroll all cycles until display shows "WASH".
Press "ENTER" until display shows "WASH1".
Use "+" & "-" to scroll cycles until display shows
"WASH2". Press
"WASH2: STEP1 DRAIN". Use "+" & "-" to scroll
steps in the sequenze until display shows
"WASH2: STEP2 LOAD". Press enter to select it,
display shows "MODIFY", use "+" & "-" to scroll
commands until display shows "ENTER AFT",
press "ENTER" to store new step. Display shows
"WASH2: STEP2 LOAD ENTER AFTER: DRAIN"
Use "+" & "-" to scroll steps until display shows
"DETERGENT", press "ENTER" to confirm entry,
then press "MENU" more times to scroll upwards
to other menus.
EXAMPLE 3:
It is required to modify water level in the water
loading of cycle WASH 4. To enter programming,
open door, display shows "DOOR OPEN", press
"MENU", display shows "PASSWORD", press 6
times on
"PROGRAMMES SET-UP/MODIFICATION" .
Use "+" & "-" to scroll main menu until display
shows "CYCLES SET-UP/MODIFICATION. Press
"ENTER", display shows "PRE-WASH". Use "+" &
"-" to scroll all cycles until display shows "WASH",
press "ENTER" , display shows "WASH1", use "+"
& "-" to scroll stored cycles until display shows
"WASH4" , press "ENTER", display shows
"WASH4: STEP 1 DRAIN". Use "+" & "-" to scroll
steps in sequence, until display shows "WASH4
STEP2 LOAD", press "ENTER" to select it, display
shows "MODIFY", press "ENTER" to modify step
parameters. Display shows "WASH4 STEP2
LOAD MOTOR TYPE". Use "+" & "-" to scroll step
parameters until display shows "WASH4: STEP2
LOAD LEVEL". Press "ENTER", display shows:
"WASH4: STEP2 LOAD LEVEL 15 CM.
Use "+" & "- " to modify value parameter. Once
required level is reached, please confirm by
pressing "ENTER".
MODIFIED: CONFIRM?"
confirm or "STOP" to abort modification, press
then "MENU" more times to scroll upwards to
other menus.
EXAMPLE 4:
It is required to modify temperature on heating
step on cycle WASH2. To enter programming,
25
"MENU", display
"PROGRAMMES
"ENTER". Display
"START". Display
Display shows
Press "ENTER" to
30/11/2003
shows
SET-
shows
shows
"STEP