Imesa IM6 Instrucciones De Uso página 23

E030101C
If washer has no handles, it will be enough to
push "DOOR OPENING" switch; if washer is a
model with handle if the washing machine has not
the handle, the door will open authomatically
when the button "DOOR OPENING" is pushed. If
door-glass has a handle, please open by rotating
it or by pushing on its button, after pushing on
door-opening switch after 8 seconds..
13. PROGRAMMING BASICALS
Please bear in mind the following, when setting up
a new programme
- A step is the basical element affected by
parameters
- A cicle consists of steps in logical
sequence
- A programme consists of cicles in logical
sequence
14. PROGRAMMES
Installing a new programme means setting up
A logical sequence of cicles.
Our IM9 microprocessor has 30 (50 for ICM
machines) programmes numbered in sequence
(1,2,3, and so on); first 8 programmes are factory
installed, (see §28, they may also be modified);
programmes 9 to 30/50 are free.
15. MODIFYING AN EXISTING PROGRAMME
A program is made up from a sequence of cycles.
Modifying a programme means:
- Delete of one of the cycles from the
sequence
- Insert in the sequence a new cycle, taking
it from the ones available in the library;
- Replace a cycle in the sequence with a
new one taken from the library.
Example 1: in case we wish to cancel 3rd cycle
(WASH 3)from PROGRAMME 3.( see the par.29)
Open door-glass; display shows "OPEN DOOR".
Push "MENU".
Display shows "PASSWORD".
Push 6 times "START".
Display shows
CREATION/MODIFICATIONI".
Push "ENTER".
Display shows "PROGRAMME 1". Push switches
"+" o "-" to scroll stored programmes until
display shows the programme you are looking for
"PROGRAMME 3". Push "ENTER" to select it.
Display shows "PRE-WASH 1", being the first
cycle of the selected programme. Use switches
"+" & "-" to scroll cycles composing the
programme until display shows the cycle to be
cancelled, i.e. "WASH 3" . Push "ENTER" to
select. Display shows "ENTER FIRST"". Use
swtiches "+" & "-" to scroll commands until display
shows "CANCEL". Push "ENTER" to cancel cycle.
Display shows
CONFIRMING?". Push "ENTER" to confirm or
"STOP" to cancel. Push then "MENU" more times
to scroll upwards to other menus.
Example 2: the requirement is to enter cycle
RINSE1 after (or before) third cycle WASH3 in
PROGRAMME 3 (see the par.29).
Open door to enter programming. Display shows
"OPEN DOOR".
Push "MENU".
Display shows "PASSWORD".
Push on "START" 6 times.
Display shows
UP/MODIFICATION".
Push "ENTER".
Display shows "PROGRAMMe 1". Use swithces
"+" & "-" to scroll stored programmes until display
shows programme you are looking for, i.e.:
"PROGRAMME 3". Push "ENTER" to select it.
Display shows "PRE-WASH 1" which is cycle no.
1 of selected programme. Use switches "+" & "-"
to scroll cycles composing programme, until
display shows the cycle where you wish to enter
the new one (fore or aft) i.e. "WASH 3". Push
"ENTER" to select it . Display shows "ENTER
FORE". Use switches "+" & "-" to scroll commands
until display shows "ENTER AFT [or FORE]".
Push "ENTER" to execute. Display will show the
listing of present cycles in the library. Use
switches "+" & "-" to scroll available cycles until
the name of the required cycle appears i.e.
"RINSE 1" . Push "ENTER" to confirm. Push then
MENU more times to scroll upwards to other
menues.
Example 3: it is required to substitute the 3rd
cycle WASH 3 of programme 3 with cycle WASH
1 (see the par.29).
Open door toh ave access to programming.
Display shows "OPEN DOOR".
Push "MENU".
Display shows "PASSWORD".
Push 6 times on "START".
Display shows
UP/MODIFICATIONI".
Push "ENTER".
Display shows "PROGRAMME 1". Use switches
"+" & "-" to scroll stored programmes until the
23
30/11/2003
"PROGRAMMES
"CYCLE CANCELLED:
"PROGRAMMES SET-
"PROGRAMMES SET