Imesa IM6 Instrucciones De Uso página 27

E030101C
for example to 3 minutes). When all parameters
are programmed, press "MENU". On the display
appears " STEP MODIFY: CONFIRM?". Press
"ENTER" to confirm, or "STOP" to cancel.
Display appears " WASH 5: STEP 1: UNLOAD
MODIFY Use "+" or "-" to select " WASH 5: STEP
1: UNLOAD INSERT AFTER".
Press "ENTER" to insert the second step.
Display appears " WASH 5: STEP 1: UNLOAD
INSERT AFTER LOAD". It could be possible now
to use "+" or "-" to select the operation from the
step menu. However as the step wanted is
already selected, press "ENTER".
Display appears "WASH 5: STEP 2: LOAD
MODIFY".
Press " ENTER".
Display appears "WASH 5: STEP 1: LOAD TYPE
MOTOR". Use "+" or "-" to select the step
parameters. To modify one of the parameters
value press "ENTER" and use "+" or "-" to
increase or reduce the value. In this step modify
the parameters TIPO MOTORE ( same as 1),
DRUM SPEED ( same as 40 rpm), the level
(same as, for example, to 15 minutes). When all
parameters are programmed, press "MENU".
Display appears "STEP MODIFY: CONFIRM?".
Press "ENTER" to confirm, or "STOP" to cancel.
On the display appears " WASH 5: STEP 2: LOAD
MODIFY". Use "+" or "-" to select "WASH 5: STEP
2: LOAD INSERT AFTER".
Press " ENTER" to insert the third step.
Display appears " WASH 5: STEP 2: LOAD
INSERT AFTER LOAD". Use "+" or "-" from the
step menu select the step wanted "DETERGENT";
press "ENTER".
Display appears " WASH 5: STEP 3: MODIFY
DETERGENT".
Press "ENTER".
Display appears
DTERGENTS TIPO MOTORI". Use "+" or "-" to
select the step parameters. To modify one of the
parameters value, press "ENTER" and use "+" or
"-" to increase or reduce the value. In this step
modify the parameters MOTOR TYPE ( same as
1), the DRUM SPEED (same as 40 rpm), put into
active DETERGENT 1, the TIME (same as 30
seconds).
Once all parameters are programmed, push
"MENU". On the display appears " STEP
MODIFIED: CONFIRM".
confirm, or STOP" to cancel.
Display appears "
DETERGENT MODIFIED". Use "+" or "-" to select
the operation " WASH 5: STEP 3: DETERGENT
INSERT AFTER".
Press "ENTER" to insert the fourth step.
Display appears "
DETERGENT INSERT AFTER LOAD". Use "+" or
"-" to select the step wanted "HEATING"; press
"ENTER".
Display appears " WASH 5: STEP 4: "MODIFY
HEATING".
"WASH 5: STEP
Press "ENTER"
WASH 5: STEP
WASH 5: STEP
Press "ENTER".
Display appears "WASH 5: STEP 4: HEATING
TYPE MOTOR". Use "+" or "-" to select the step
parameters.
To modify one of the parameters value press "
ENTER" and use "+" or"-" to increase or reduce
the value. In this step modify the parameters
TYPE MOTOR ( same as 1), the DRUM SPEED
(same as 40 rpm), the temperature (same as 45° )
and the WDT (same for example of 30 minutes).
When all the parameters are programmed press
"MENU".
Display appears "STEP MODIFIED :CONFIRM?".
Press "enter" to confirm, or "STOP" to cancel.
Display appears " WASH 5: STEP 2: LOAD
MODIFY". Use "+" or "-" to select "WASH 5: STEP
2: LOAD INSERT AFTER".
Press enter to insert the third step.
Display appears "WASH 5: STEP 2: LOAD
INSERT AFTER LOAD". Use "+" "-" to select the
step wanted " DETERGENT";
Press "ENTER".
Display appears
DETERGENTS MODIFY".
Press "ENTER".
Display appears
DETERGENTS TYPE MOTOR". Use "+" or "-" to
select the step parameters. To modify the
parameter value press "ENTER" and use "+" or "-"
to increase or reduce the value. In this step
modify the parameter TYPE MOTOR (same as 1),
DRUM SPEED (same as 40 rpm), activation of
DETERGENT 1, the TIME (same as 30 seconds).
When all parameters are programmed, press
"MENU".
Display appears STEP MODIFY: CONFIRM?".
Press "ENTER " to confirm, or "STOP" to cancel.
Display appears
3: DETERGENTS MODIFY". Use "+" or "-" to select "
WASH 5: STEP 3: DETERGENTS INSERT
AFTER".
Press "ENTER" to insert the fourth step.
Display appears
DETERGENTS INSERT AFTER LOAD". Use "+"
or "-" to select the step wanted "HEATING" press
"ENTER".
Display appears "WASH 5: STEP 4: HEATING
MODIFY".
Press "ENTER". On the display appears "WASH
to 5: STEP 4: HEATING TYPE MOTOR Use "+" or"-"
to select the step parameters. To modify one of
3: the parameters value, press "ENTER" and use "+"
or "-" to increase or reduce the value. In this step
modify the parameters TYPE MOTOR (same as
1), DRUM SPEED (same as 40 rpm) the
TEMPERATURE (same as 45° ) and the WDT
3: (same for example to 30 minutes). Once all the
parameters are programmed, press "MENU".
Display appears "STEP MODIFY: CONFIRM?
Press "ENTER" to confirm or "STOP" to cancel.
Display appears
DETERGENTS MODIFY". Use "+" or "-" to select
27
30/11/2003
"WASH 5: STEP
"WASH 5: STEP
"WASH 5: STEP
"WASH 5: STEP
"WASH 5: STEP
3:
3:
3:
3:
4: