Imesa IM6 Instrucciones De Uso página 24

E030101C
required is reached i.e."PROGRAMME 3". Press
"ENTER" to select. Display shows "PREWASH 1"
first cycle of selected programme. Use switches
"+" & "-" to scroll cycles composing programme,
until display shows cycle to be substituted for
instance "WASH 3". Push "ENTER" to select it.
Display shows "ENTER FORE". Use switches "+"
& "-" to scroll commando until display shows
"MODIFY". Push "ENTER" to enter substitution.
Display shows listing of
library. Use switches "+" & "-" to scroll available
cycles, unitl the cycle to be entered will appear:
"WASH 1". Push "ENTER" to confirm. Push more
times on "MENU" to scroll upwards to other menu.
16. SET-UP OF A NEW PROGRAMME
Setting up a new programme is mainly the
construction of a logical sequence of cycles
chosen among those available in the library (see
the par.30).
In case of an unexisting cycle, yet necessary for a
programme set-up, you will have to proceed with
the creation of a new programme including the
missing cycle.
The new programme will have to be stored in the
memory of an empty
programmes 1 to 8 already installed, the first
programme available will be no. 9.
Example: it is required to set-up a new
programme which will be numbered as 9 and
made of:
Cycle 1: PREWASH 2
Cycle 2: SPIN 1
Cycle 3: RINSE 3
Cycle 4: SPIN 3
Cycle 5 : ANTI-WRINKLE DE-ROLL
To enter programming, open door, display will
show "OPEN DOOR "
Push "MENU"
Display shows "PASSWORD"
Push "START" 6 times
Display shows
PROGRAMMES"
Push "ENTER".
Display shows "PROGRAMME 1" . Use switches
"+" & "-" to scroll stored programmes until display
shows the number of programme being
implemented: "PROGRAMME 9 : FREE", press
"ENTER" to select it . Display appears
"PROGRAM 9". Push "ENTER" and verify that the
program 9 is free.
Display appears " PROGRAM 9 FREE".
Push "ENTER" to start the programming.
On the display appears one of the following
operations; " MODIFY", " INSERT BEFORE",
"INSERT AFTER", "CANCEL".
Use the key "+" or "-" on the keyboard until on the
display appears the operation " MODIFY".
Push "ENTER". On the display appears list of
cycles memorized in the library. Use the keys "+"
or "-" to select the cycles available until appears
cycles existing in the
programme; being
"SET-UP/MODIFY
the name of the cycle to insert: " PREWASH 2".
Push "ENTER" to insert the first cycle.
On the display appears " PROGRAMME 9,
PREWASH 2, MODIFY".
As we have to proceed to insert one cycle just
after the selected PREWASH 2, use the keys "+"
or "-" to select the operations, until on the display
appears the operation "INSERT AFTER".
Push "ENTER".
On the display appears the list of cycles
memorized in the library. Use the keys "+" or "-" to
select the cycles available until appears the name
of the cycle to insert: "SPIN 1". Push enter to
insert the second cycle.
On the display appears "PROGRAMME 9, SPIN
1, INSERT AFTER".
As we have to proceed to insert one cycle just
after the SPIN 1 just inserted, push "ENTER".
On the display appears the list of cycles stored in
the library. Use the keys "+" or "-" to select the
cycles available, until appears the cycle's name to
insert: "RINSE 3". Push "ENTER" to insert the
third cycle.
On the display appears "PROGRAM 9, RINSE 3,
INSERT AFTER".
As we have to proceed to insert one cycle just
after the RINSE 3 just inserted, push "ENTER".
On the display appears the list of cycles stored in
the library. Use the keys "+" or "-" to select the
cycles available, until appears the name of the
cycle to insert "SPIN 3". Push "ENTER" to insert
the fourth cycle.
On the display appears " PROGRAM 9, SPIN 3,
INSERT AFTER".
As we have to proceed to insert one of the cycles
just after the SPIN 3 just insert, push "ENTER".
On the display appears the list of the cycles
stored in the library. Use the keys "+" or "-" to
select the cycles available, until appears the name
of the cycle to insert : " ANTI-WRINKLE UNROLL
1". Push "ENTER" to insert the fifth cycle.
Push the key "MENU" more times to scroll
upwards to other menus.
17. PROGRAMME NAME
It is possible to give a specific name to every
memorized programme, in order that it appears in
any selection and execution phase.
Example: you want to change the name of
PROGRAMME 3.
Open the door to enter in to programmation.
"DOOR OPENED" appears in the display.
Press "MENU".
Appears "PASSWORD".
Press six times "START".
Appears"CREATION/MODIFY PROGRAMMES".
Press "ENTER".
Appears "PROGRAMME 1". Use "+" o "-" untile
appears what you have been looking for:
"PROGRAMMA 3".
Press "DOOR OPENING". Appears "PROG 3 ▓".
24
30/11/2003