ASSEMBLY STEP 10
7.3AE
20
(7.3AE)
19
18
20
22
21
11
If you would like to use the elliptical without the UPPER
HANDLEBARS (19), you can install the HANDLEBAR
COVERS (21) instead.
NOTE: All hardware for this step is included in the plastic
bag with the HANDLEBAR COVERS.
A If the UPPER HANDLEBARS (19) are already
installed, remove the PRE-INSTALLED SCREWS
(20) and slide off the UPPER HANDLEBARS (19)
and HANDLEBAR BOOTS (18) from the LOWER
HANDLEBARS (11).
B Remove 2 HANDLEBAR COVERS (21) and SCREWS
(22) from plastic bag.
C Place HANDLEBAR COVERS (21) over the LOWER
HANDLEBARS (11) and attach using 2 included
SCREWS (22).