Kichler Ample 310354 Manual De Instrucciones página 12

INSTALLATION OF SAFETY Cable
(required for Canadian installation ONLY)
A safety support cable is provided to help prevent the ceiling fan from
falling, please install it as follows.
Step 1. Attach the provided wood screw and washer to the ceiling joist next
to the mounting bracket but do not tighten. (Fig. 12)
Step 2. Adjust the length of the safety cable to reach the wood screw and
washer by pulling the extra cable through the cable clamp until the overall
length is correct. Put the end of the cable back through the cable clamp,
forming a loop at the end of the cable. Tighten the cable clamp securely.
Put the loop in the end of the safety cable over the wood screw and under
the washer. Tighten the wood screw securely.
NOTE: Although the safety support cable is required for Canadian
installations only, it is a good idea to make the attachment with any
installation.
12 | KICHLER.COM
Ceiling Mounting Bracket
Safety Support Cable
Fig. 12
Attach Safety Cable to
Ceiling Joist with Wood
Screws and Washer