Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
INSTALLING THE TRANSMITTER BATTERIES (Fig. 25)
Step 1. Remove the back cover of the transmitter and safety screw. (Fig. 25)
Install two CR2032 3V batteries (included) with the+ side facing up.
NOTE: To prevent damage to the transmitter, remove the batteries if not in use
for long periods of time (several months).
Step 2. Replace back cover of transmitter and safety screw.
WARNING: Chemical Burn Hazard. Keep batteries away from
children. This product contains a lithium button/coin cell battery.
If a new or used lithium button/coin cell battery is swallowed or
enters the body, it can cause severe internal burns and can lead
to death in as little as 2 hours. Always completely secure the
battery compartment. If the battery & compartment does not
close securely, stop using the product, remove the batteries, and
keep it away from children. If you think batteries might have been
swallowed or placed inside any part of the body, seek immediate
medical attention.
a) The cells shall be disposed of properly, including keeping them
away from children; and
b) Even used cells may cause injury.
22 | KICHLER.COM
Safety Screw
Back Cover
Fig. 25
Batteries
Publicidad
