Dual-Post Height Adjustable Flip-Back Armrest; Seat Depth & Angle Adjustment On Seat Frame; K.SEat Depth Adjustment; Parapak Seat Sling Adjustment - Quickie Freestyle M11 Manual De Instrucciones

24
I. DUAL-POST HEIGHT-ADJUSTABLE FLIP-BACK ARMRESTS (Seat Frame Only)
(Figures 17 & 18)
The dual-post flip-back armrest can be used as either a flip-back armrest or a removable
armrest.
1. Installing Armrest
a. Flip levers C and D to open receivers.
b. Insert front and rear armrest posts into receivers.
c. Fip levers C and D to engage.
2. Set-up for Flip-back Operation
a. Flip lever C so front post is able to lift free.
b. Armrest now has the ability to be flipped back without removal.
3. Set-up for Removal
a. Flip levers C and D so front and rear posts are able to lift out freely.
b. Armrest can now be easily removed for transferring.
4. Height-Adjustment
a. Release the upper securing lever (E).
b. Set at desired height.
c. Return securing lever to locked position.
d. Move armrest up or down to allow armrest to snap into place.
J. SEAT DEPTH AND ANGLE ADJUSTMENT ON SEAT FRAME
(Figure 19)
A backrest angle adjustment is standard on the Contour seat, the Highback Contour seat
and the Seat Frame.
a. Remove the front securing bolt (A) on the side of the backrest hinge plate.
b. Loosen the lower rear bolt (B).
c. Set at desired angle. Adjustment is from 86° to 115°.
d. Reinstall the front bolt (A) and tighten both bolts securely.
K. SEAT DEPTH ADJUSTMENT (Seat Frame)
(Figure 20)
The seat depth can be adjusted in one inch increments.
a. Remove the two bolts (A) from each side of the backrest pivot plate.
b. Reposition the backrest to the desired position.
c. Replace and retighten bolts on each side of th backrest pivot plate.
L. PARAPAK SEAT SLING ADJUSTMENT (Seat Frame)
(Figure 21)
The seat sling tension can be adjusted through use of the Velcro® retaining material
beneath the seat.
a. Remove the screws retaining the left side seat sling.
b. Readjust Velcro®-style material to increase the tension in the seat sling.
c. Replace screws and tighten.
Important Note– If there is any difficulty in re-attaching the screws, try using a probe to help line up
the holes.
930583 Rev. F
E n g l i s h
I X . S e t - U p , A d j u s t m e n t & U s e
E
A
A
17
D
C
18
19
B
20
21