Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Getting Started
•
Take the espresso machine out of the packaging carton and check that the
accessories are complete.
•
Clean all detachable parts.
•
Depending on the coffee preparation, clean the espresso machine 2-3 times
with clear water. Make sure that there is no coffee powder in the device when
cleaning the espresso machine.
Note: When it is used for the first time, the product may not produce
water, causing it to enter a protected state. At this time, you can press
the "Clean/Descale" button once to enter the cleaning mode of milk foam
system. Then, the "Clean/Descale" button indicator light flashes for about
30 seconds after automatic stop.
Filling the water tank
1.
Open the water tank lid and the take out the tank by pulling upwards.
2.
Fill the tank with fresh clean water and take care not to exceed the MAX level.
Replace the tank , pressing lightly to open the valve located on the bottom of
the tank.
3.
More simply , the tank can also be filled without removing it ,pouring the
water directly from a jug.
EN
35
Publicidad
