Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Problem
The coffee is spill out
from the gap of the
funnel.
The coffee handle
cannot be switched to
the lock position.
Cold coffee.
The pump is too noisy
Light coffee.
Possible cause
There are sundries inside the
seal ring.
The coffee powder is too fine.
The coffee powder has been
pressed too tightly.
The seal ring is being of
aging.
There is coffee powder at the
top of filter cup.
The coffee powder amount
has exceeded the max scale
of the funnel.
The coffee powder hasn't
been added and the handle
could not be switched to the
right place.
The indicator light is not on.
Coffee machine boiler burns
out.
Without water in water tank
Mount the water tank in
wrong way
Coffee powder is not pressed
to be flat enough
Not enough coffee powder
Coffee powder is too coarse
Solution
Clean the sundries inside the
seal ring.
Please replace it with the coffee
powder which is relevantly
coarse.
Please press the coffee power
with strength of 33 pounds
(about 15kg)
Please contact the authorized
service center.
Clean the top of filter cup before
put into machine
Decrease the amount of the
coffee powder.
Please contact the authorized
service centre.
Operation when the indicator
light is on.
Please contact the authorized
service centre.
Please pour water into water
tank
Please mount water tank in right
way
Please press coffee powder to
flat again
Please add coffee powder
Please use dedicated Espresso
coffee powder
EN
45
Publicidad
