Klarstein ESPRESSIONATA EVO MILK Manual Del Usuario página 46

EN
Problem
Coffee colour is too
dark
Coffee is made
normally, but the milk
foam generator cannot
produce milk.
Milk has no foam after
foaming.
The portafilter cannot
be locked properly.
"Clean/Descale"-
>"Espresso"->"Froth/
Cappuccino" ->"Latte"
->"Clean/Descale" is
displayed in a cycle
The indicator light
of "Clean/Descale"
button will flash
quickly
Coffee machine does
not produce coffee and
milk for the first time.
46
Possible cause
The powder in the sieve was
pressed too hard.
Too much powder.
The sieve is dirty.
The powder is too fine.
The water outlet is clogged.
The milk foam system is
blocked
Milk is not cold enough.
Too much powder.
The holder is defective.
There is no water in the water
tank.
This descaling alarm reminds
the user to descale the
machine.
The water pump is running
out of water for a long time,
resulting in inability to pump
water, or the coffee is made
when the water tank is empty
Solution
Don't press the powder so firmly
next time.
Adjust the amount of powder
(see: Frequently Asked
Questions).
Clean the sieve.
Use coarser powder.
Clean the water outlet.
Add a proper amount of vinegar
to the water tank and try to use
the function of cleaning the milk
foam system.
Ice-cold milk
Adjust the amount of powder
(see: Frequently Asked
Questions).
Contact a specialist company.
Pour water int.o the water tank
Descale according to the
instructions.
Press the "Clean/Descale"
button once to enter the
cleaning mode. of milk foam
system