Publicidad
Idiomas disponibles
Idiomas disponibles
setting of coffee quantity is complete.
4.
The acquiescent set time of the machine is about 21 seconds if the coffee
making time is set to less than 15 seconds. If the button is not pressed during
making coffee, it will automatically stop after 75 seconds.
Factory default value (resetting)
This operation will return the set cup quantity to the factory default value. To
restore the factory default value, please follow the following step:
After the coffee machine is preheated, press and hold the "Espresso" and "Froth/
Cappuccino" buttons for 3 seconds, and all indicator lights will flash five times. At
this time, the factory default settings of the machine have been restored.
Making Cappuccino
1.
Put the required coffee powder in the filter after the coffee machine
preheating (7-8g for a small cup, 14-15g for large cup, and the pressing
powder for 150N). After the coffee powder is compacted, the filter is needed
to be put into the designated position of the funnel and screw the funnel into
the designated position of the coffee machine.
2.
Put a cup of suitable size at the coffee outlet, rotate the milk foam generator
knob to align the milk foam generator with the cup rim (the milk foam
generator can have its length adjusted by rotating it counterclockwise to the
specified position, pulling towards the cup rim, adjusting to the corresponding
position, and then rotating it clockwise for fixing), and rotate the milk foam
adjustment knob to the small milk foam position.
3.
Press the "Froth/Cappuccino" button once, and wait for 5 seconds. Then,
the indicator light of Cappuccino in small cup will flash, while the indicator
lights of other coffee functions will be half lit, and the coffee machine will
start heating for a period of time (4-30 seconds). When it reaches the set
temperature, the milk foam generator will produce the milk foam. After the
milk foam is produced, the coffee will flow out of the funnel. After the coffee is
made, the buzzer sounds once.
4.
Press the "Froth/Cappuccino" button twice, and wait for 5 seconds. Then,
the indicator light of Cappuccino in large cup will flash, while the indicator
lights of other coffee functions will be half lit, and the coffee machine will
start heating for a period of time (4-30 seconds). When it reaches the set
temperature, the milk foam generator will produce the milk foam. After the
milk foam is produced, the coffee will flow out of the funnel. After the coffee is
made, the buzzer sounds once.
5.
In the process of making fancy coffee, you can stop the coffee by pressing the
button of making fancy coffee again.
EN
39
Publicidad
