Craftsman 126.32561 Manual Del Operador página 20

3. Rotate the lower guard up and into the
upper blade guard to gain access to the
machine arbor. (Fig. E)
(Fig. E)
4. Press the arbor lock button to lock the arbor.
(Fig. F)
NOTE: The arbor screw is reversed threaded.
Turn to the right to loosen and to the left to tighten.
6. Install the new 10 inch blade. Make sure
the rotation arrow on the blade matches the
rotation arrow on the upper blade guard.
NOTE: The blade teeth should always point
downwards at the front of the saw.
7. Install the blade, blade collar, washer and
arbor bolt. (Fig. G, 1, 2, 8, 4)
1
4 3 2
(Fig. G)
(Fig. F)
5. Using the supplied Allen key stored in the
back of the cutting head neck, release the
arbor screw to remove the blade.
8. Lock the arbor and tighten the arbor screw
using moderate force, but DO NOT over
tighten. (Fig. F)
9. Ensure that the Allen Key is removed and
the arbor lock has released by rotating the
blade by hand.
10. Return the Auxiliary Guard to its
procudureal position.
11. Ensure that all blade guards are correctly
positioned and fully functional.
12. Return the Allen key to its "on board"
storage position.
NOTE: Spacers and spindle rings should not
be used with this machine or blade.
20