3. Insert the plug for the connection cable into the side socket on the control unit.
Please observe the instructions for use included with the accessory set.
7. CLEANING
• Remove the batteries from the device each time you clean it.
• Clean the device with a slightly moistened cloth. In case of more extreme soiling you can also
moisten the cloth with mild soapy water.
• Never drop the device.
• Ensure that no water penetrates into the device. If this should ever happen then only use the de-
vice once it is completely dry.
• Do not use any chemical cleaners or abrasive agents for cleaning.
• Once you have removed the device (operating unit), you can wash the belt in luke warm water. Use
mild soapy water or a liquid detergent for this purpose. Do not use bleaches.
• The belt is unsuitable for machine washing.
8. TECHNICAL SPECIFICATIONS
Model:
Power supply:
Electrode size:
Parameter (500 Ohm load):
Pulse duration:
Waveform:
Weight:
Belt size for waist measurement from:
Maximum permissible operating conditions:
Maximum permissible storage conditions:
Transport conditions
Changes to the technical specifications introduced for reasons of updating without notice are re-
served.
9. REPLACEMENT PARTS AND WEARING PARTS
To purchase accessories and replacement parts, please visit www.beurer.com or contact the cor-
responding service address (according to the service address list) in your country. Accessories and
replacement parts are also available from retailers.
Designation
Accessory set
10. WARRANTY/SERVICE
Further information on the guarantee and guarantee conditions can be found in the guarantee
leaflet supplied.
EM 37
3 x 1.5 V AAA (type LR 03)
approx. 11.5 x 6.5 cm / 10 x 9 cm
Output voltage max. 70 V p-p
Output current: max. 140 mA p-p
Output frequency: 30 – 80 Hz
200µs per phase
symmetrical, dual-phase square wave
314 g (without batteries and extension)
70 to approx. 140 cm. (28 – 55 Inch)
10 °C to +40 °C, 20-65 % relative humidity
0 °C to +55 °C, 10-90 % relative humidity
-10 °C - 50 °C, 10-90 % relative humidity
Item number and/or order number
647.05
18