Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY
This section contains information and important notes on the safe commissioning and handling of
the machine.
For your safety, read this manual carefully before commissioning. This will enable you
to handle the machine safely and thus prevent misunderstandings as well as
personal injury and damage to property. Pay special attention to the symbols and
pictograms used on the machine as well as the safety information and danger
warnings!
12.1 Intended use of the machine
The machine is designed exclusively for the following activities:
For sawing wood and materials with similar physical properties to wood, such as plastic or
aluminium, using an effective dust collection system according to technical specifications and
operation only within the technical limits..
HOLZMANN MASCHINEN GmbH assumes no responsibility or warranty for any other
use or use beyond this and for any resulting damage to property or injury.
Technical restrictions
The machine is designed for the work under the following conditions:
Relative humidity
Temperature (operation)
Temperature (storage, transport)
Prohibited applications /Dangerous misuse
Operating the machine outdoors.
•
•
Operating the machine without adequate physical and mental fitness.
Operating the machine without knowledge of the manual.
•
•
Modifying the machine design.
•
Operating the machine in an explosive environment (machine can generate ignition
sparks during operation).
•
Operating the machine in closed rooms without chip and dust extraction (a normal
household hoover is not suitable as an extraction device).
•
Operating the machine outside the technical limits specified in this manual.
Machining materials with dimensions outside the limits specified in these instructions.
•
Removing of the safety markings attached to the machine.
•
•
Modifying, circumventing or disabling the safety devices of the machine.
Using tools that do not comply with the safety requirements to the standard for machine
•
tools for woodworking (EN847-1).
No materials with the following properties may be machined.
•
(1) bulky materials, (2) soft / unstable materials that can deform during machining or
several workpieces or bundled workpieces at once, (3) round materials.
(1)
HOLZMANN Maschinen GmbH
(2)
www.holzmann-maschinen.at
N O TE
max. 65 %
+5 °C to +40 °C
-20 °C to +55 °C
(3)
VPS3216ECO_230V
SAFETY
29
Publicidad
