HOLZMANN MASCHINEN VPS3216ECO 230V Instrucciones De Servicio página 41

Horizontal cuts
Mitre cutes (VPS3216ECO)
Miter cuts can be made as horizontal or vertical cuts, the identical procedure described according
to the type of cut applies here, only the saw is tilted in the desired angular position.
Ending operation
When the work is finished, the machine must be switched off.
Disconnect the machine from the power supply.

CLEANING, MAINTENANCE, STORAGE, DISPOSAL
Danger due to electrical voltage!
Handling the machine with connected power supply may result in serious injury or
death.
 Always disconnect the machine from the power supply before cleaning,
maintenance or repair work and secure it against unintentional reconnection.
Wear protective cutting gloves when handling the saw blade and scoring

blade to reduce the risk of injury!!
16.1 Cleaning
Regular cleaning guarantees the long service life of your machine and is a prerequisite for its safe
operation.
Incorrect cleaning products can attack the finish of the machine. Do not use any
solvents, nitro thinners or other cleaning products that could damage the machine's
finish.
Observe the specifications and instructions of the cleaning agent manufacturer.
• After each work shift, clean the machine and all its parts thoroughly.
HOLZMANN Maschinen GmbH
• Placing the plate on the machine.
Position for horizontal cuts selected
•
• Fixing lever for vertical cuts released
• Saw positioned next to plate/workpiece
Switch on the machine and wait until the machine
•
has reached the set motor speed.
Saw unit in cutting position (plunge)
•
Guide the saw unit smoothly and quietly from left to
•
right until the end of the cut.
Switch off the machine
•
• Sawing unit in parking position
Unload machine or prepare new cut
•
WAR N I N G
C AU TI O N
www.holzmann-maschinen.at
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
N O TE
N O TE
41
VPS3216ECO_230V