BDS Maschinen MAB 1300 Instrucciones De Manejo página 54

Preparation
Adapter for drill taps
54
NOTE
► For cutting threads, the tool holder with retainer must be
dismantled.
For further information, see the section Dismantling/as-
sembling the tool holder.
► BDS offers matching industrial tool holders and drill tap
adapters in its range of accessories.
Inserting the tool
Insert the tool holder with Weldon shank from below into the
‹
morse taper (5) of the machine.
Insert the drill tap into its matching adapter.
‹
Insert the drill tap with adapter into the industrial tool holder.
‹
Turn both Allen screws of the industrial tool holder securely.
‹
Removing the tool
Loosen both Allen screws in the tool holder and remove the
‹
adapter with drill tap by pulling it downwards.
Remove the drill tap by pulling it downwards out of its adap-
‹
ter.
MAB 1300