Selecting The Speed Range - BDS Maschinen MAB 1300 Instrucciones De Manejo

Operation

Selecting the speed range

56
CAUTION
► Switch over the gear stages only with the machine at stand-
still.
The machine is equipped with a gearbox that has four mechanical
gear stages. The gear stage is set using both selector levers (7)
on the side of the gear box.
To select the desired gear stage, switch the machine off and
‹
set both selector levers (7) to the desired speed as shown in
the table below.
Gear stage
Stage 1
Stage 2
Stage 3
Stage 4
NOTE
► Select the speed range according to the material and drilling
diameter.
Speed
anti-clock-
wise
●
80 min
-1
●●
120 min -1
●
350 min
-1
●●
550 min -1
Rotary switch
clockwise
●
●
●●
●●
MAB 1300