Ingeteam INGECON SUN 3TL Manual De Instalacion Y Uso página 16

Ingeteam
4. Equipment transport
The unit must be transported in the upright position, protecting it during transport from mechanical knocks,
vibrations, water splashes (rain) and any other product or situation which may damage it or alter its behavior.
Failure to observe these instructions may lead to loss of warranty on the product, for which Ingeteam is not
responsible.
4.1. Transport
Transport using a forklift or pallet truck
At least the following requirements should be observed:
1. Place the packaged units centered with respect to the forks.
2. Try to locate them as close as possible to the part where the forks and the steering unit meet.
3. Ensure that the forks are perfectly level to avoid overturning the unit.
4. In all cases, observe the instructions in the forklift or pallet truck user manual.
Once the unit has been transported to the place where it is to be located and only when it is to be installed,
unpack the unit.
16 ACL2011IQM01_ - Installation and Operation Manual
Equipment transport