Ingeteam INGECON SUN 3TL Manual De Instalacion Y Uso página 17

Preparation for installing the unit
5. Preparation for installing the unit
When deciding the location of the unit and planning your installation, you must follow a set of guidelines based on
the specifications of the unit. These guidelines are summarized in this chapter.
5.1. Environment
• These units can be installed indoors and outdoors.
• Situate the units in a place that is accessible for installation and maintenance work and which allows
access to the control panel.
• Avoid corrosive environments that may affect the proper operation of the inverter.
• Do not leave objects on top of the unit or its sides, as they may block the ventilation and cause high
temperatures.
• Do not expose the inverters to direct sunlight.
• Do not install the units in inhabited rooms, due to the noise produced during operation.
• If they are installed inside a closed space (room, hut, etc.), provide adequate ventilation. The operating
range of the units depends on the environmental temperature, therefore a lack of ventilation may limit
their capacity.
ACL2011IQM01_ - Installation and Operation Manual
Ingeteam
EN
ES
FR
IT
PT
17