Fronius Selectiva 4.0 Serie Manual De Instrucciones página 10

-
-
-
-
Personal protec-
Keep persons, especially children, away from the device and working area during
tion and protec- operation. However, if persons are in the vicinity:
tion of others -
-
Before leaving the working area, ensure that no personal injury or property dam-
age can occur in your absence.
Safety measures Operate devices with ground conductors only on a grid with a ground conductor
in normal opera- and a socket with a ground conductor contact. Operating the device on a grid
tion without a ground conductor or on a socket without a ground conductor contact is
considered gross negligence. The manufacturer accepts no liability for any dam-
age resulting from improper use.
Only operate the device in accordance with the protection class shown on the
rating plate.
Never commission the device if it is damaged.
Have the grid and device supply lead regularly inspected by an electrician to en-
sure that the ground conductor is functioning properly.
Safety devices that are not fully functional and components with defects must
be repaired by an authorized specialist before the device is turned on.
Never bypass or disable protection devices.
A freely accessible mains plug is required after installation.
EMC device clas-
Devices in emission class A:
sifications -
-
Devices in emission class B:
-
EMC device classification as per the rating plate or technical data.
EMC Measures In certain cases, even though a device complies with the standard limit values for
emissions, it may affect the application area for which it was designed (e.g., when
there is sensitive equipment at the same location, or if the site where the device
is installed is close to either radio or television receivers).
10
In case of leakage of substances due to damage or improper handling, the
manufacturer's instructions must be followed without fail
This includes in particular the use of personal protective equipment
When storing larger quantities of lithium batteries, the local authorities
should be consulted
Training of employees in the proper handling of lithium batteries (analogous
to hazardous materials)
Inform them of any dangers (hazardous acids and gases, risk due to grid and
charging current, etc.),
Provide suitable protective equipment.
Are only designed for use in industrial areas
Can cause wiring-related or radiated interference in other areas.
Satisfy the emissions criteria for residential and industrial areas. This is also
true for residential areas in which the energy is supplied from the public low-
voltage grid.