Fronius Selectiva 4.0 Serie Manual De Instrucciones página 37

Charging the battery
Starting for the When the battery charger is connected to the grid for the first time, the device is
first time
in SETUP mode.
In this mode, the following basic settings must be made or confirmed:
-
-
-
-
-
1
Language (English, German, French, etc.)
Date, time, and time zone
Units: metric / imperial
Charging cable length and charging cable cross-section
Type of battery, curve, number of cells, and charging time or battery capacity
Connect the mains plug of the battery charger to the electrical grid.
Use the "Up/Down" buttons to se-
2
lect the desired menu language.
Confirm with the "Pause/Start"
3
button.
English is set as the default language.
Use the "Up/Down" buttons to se-
4
lect the time zone.
Confirm with the "Pause/Start"
5
button.
The time zone UTC+1 Central
European Time (Berlin) is set as de-
fault.
The following settings must be made:
- Daylight saving time ON/OFF
- Hour format
- Time
- Date
Use the "Up/Down" buttons to se-
6
lect the desired setting.
Press the "Pause/Start" button to
7
confirm each setting.
Daylight saving time ON and the 24-
hour format are set as default.
Use the "Up/Down" buttons to se-
8
lect the desired setting (metric /
imperial).
Confirm with the "Pause/Start"
9
button.
37