Fronius Selectiva 4.0 Serie Manual De Instrucciones página 69

Overview of available options
Safety The housing has to be partially opened to connect the options.
Danger of electric shock.
This may result in serious injuries or death.
▶
▶
▶
▶
Danger due to work that is not carried out properly.
This can result in severe personal injury and damage to property.
▶
▶
▶
▶
▶
External start/ The external start/stop option prevents spark formation at the charging plug if it
stop is disconnected during charging. Special contacts inside the charging plug re-
gister a disconnection. These contacts are leading in comparison to the main
contacts. An immediate charging stop is triggered. There is therefore no wear on
the main contacts and the level of safety against oxyhydrogen ignition is in-
creased.
Temperature- The temperature-controlled charging option continuously regulates the charging
controlled char- voltage according to the current battery temperature. This significantly extends
ging the battery-life, especially when used in cold rooms.
Wall and floor The robust wall and floor bracket ensures safe installation at the place of use.
bracket
Detailed information can be found in the corresponding Installation Instructions.
WARNING!
The housing must never be opened by anyone other than a service technician
trained by the manufacturer.
Before working with the housing open, the device must be disconnected from
the grid.
A suitable measuring device must be used to ensure that electrically charged
components (e.g., capacitors) are completely discharged.
With the aid of a clearly legible, understandable warning sign, ensure that
the device remains disconnected from the grid until all work has been com-
pleted.
WARNING!
All work involved with connecting optional components must only be carried
out by service technicians trained by the manufacturer.
If there are Installation Instructions or User Information for the optional
component concerned, then all warning notices and instructions therein
must be obeyed.
For all options with electrical connections, a safety inspection must be car-
ried out in accordance with the applicable national and international stand-
ards and guidelines after connection work has been carried out.
You can obtain more information about the safety inspection from the au-
thorized service body.
The service body will provide the necessary documents upon request.
69