Honda WT20X Manual Del Propietário página 46

Model
Power products description code
Dimensions and Weight
Length
Width
Height
Dry mass [weight]
Engine
Model
Engine type
Displacement
[Bore × Stroke]
Engine Net Power
(in accordance with SAE J1349*)
Engine Max. Net Torque
(in accordance with SAE J1349*)
Fuel tank capacity
Cooling system
Ignition system
PTO shaft rotation
Carbon dioxide (CO2)
emissions**
Pump
Suction port diameter
Discharge port diameter
Maximum total head lift
Maximum suction head lift
Maximum discharge capacity
Priming time
* The power rating of the engine indicated in this document is the net power output
tested on a production engine for the engine model and measured in accordance
with SAE J1349 at 3,600 min
Net Torque). Mass production engines may vary from this value.
Actual power output for the engine installed in the final machine will vary
depending on numerous factors, including the operating speed of the engine in
application, environmental conditions, maintenance, and other variables.
** The CO2 measurement results from testing over a fixed test cycle under laboratory
conditions a(n) (parent) engine representative of the engine type (engine family) and
shall not imply or express any guarantee of the performance of a particular engine.
WT40X K3
WAYJ
735 mm (28.9 in)
535 mm (21.1 in)
565 mm (22.2 in)
78 kg (172 lbs)
GX390T2
4-stroke, over head valve,1cylinder
3
389 cm (23.7 cu-in)
88.0 × 64.0 mm (3.46 × 2.52 in)
8.7 kW (11.8 PS)/3,600 min
26.5 N·m (2.7 kgf·m, 19.5 lbf·ft)/2,500 min
6.1 L (1.61 US gal, 1.34 lmp gal)
Forced air
CDI magneto
Counterclockwise
Please refer to "CO2 Information List" on
www.honda-engines-eu.com/co2
100 mm (3.9 in)
100 mm (3.9 in)
Minimum 25 m (82 ft)
Minimum 8 m (26 ft)
Minimum 1600 L (422.7 US gal, 352 lmp gal)/min
Maximum 150 SEC/4.5 m (14.8 ft)
-1
(Engine Net Power) and at 2,500 min
-1
-1
-1
(Engine Max.
43