Publicidad
EN
3. TRAVEL SPEED SETTING
CAUTION: If you changed the speed op�on
again, it will cancel the previous travel limit.
The speed adjustment func�on will be
available only a�er you reset the travel limit.
a) Press and hold SET Buton un�l "1" appears
on the display, next press the UP buton un�l
"3"appears on the display to enter this
func�on se�ng then release the buton.
b) Press the SET buton again. The unit is now
in speed adjustment mode. And then you will
see a leter "A" with flash dot appears on the
display.
c) Press the UP & DOWN buton to choose the
speed. Figure "8" means the 80% of the travel
speed. Figure "A" means the full speed.
d) Press SET buton to confirm the set and it
will back to standby status automa�cally and
display "ll".
NOTE: The travel speed is set on full speed "A"
as standard in factory.
1 – Increase speed
2 – Decrease speed
Publicidad
