Other terminal introduction and application
1.
The O/S/C interfaces available. (Fig. 22)
Add a new O/S/C buton to open or close the door.
2.
Flash light func�on. (Fig. 24, Fig. 25)
There are corresponding interfaces for this func�on and provide 24v-35v flash light voltage. Connect the flash light
with DC 24v-28v, current≤ 100mA. When use AC 220V power flash lights, please match an adapter, and wiring as
required.
EN
1 – Garage door opener
2 – Photo beam for pulse
Figure 22
Connec�on of photo beam/switch control
Figure 23