Publicidad
Remote setting
a) Press and hold SET Buton un�l "1" appears on the display, next short press the UP/Down Buton
un�l "F" appears on the display to enter this func�on se�ng then release the buton (Fig.1-2).
b) Press the SET Buton it will display the status that you choose (Fig.3).
c) Press UP/Down Buton to set the condi�on "0-1" you want (Fig.4-5).
d) Press SET Button to confirm.
Figure "0" means the communica�on func�on is closed, the door can stop in the any posi�on by
remote.
Figure "1" means, the communica�on func�on is opened, the door can't stop in the any posi�on
by remote during opening. But the door can stop in the any posi�on by remote during closing, and
it will automa�cally bounce to the top.
Aten�on: If you are using the remote by universal receiver, it's no affected with this se�ng.
Figure 1
Figure 3
Figure 5
EN
Programming the communication function
Figure 2
Figure 4
Publicidad
