Publicidad
Idiomas disponibles
Idiomas disponibles
TN: Garra = Grip
4.7. CURRENT SENSOR CONNECTION
Couple the connector of the current sensors set to he connector in the
PowerNET P-600 LOWER PANEL.
4.8. CONNECTION WITH 3 CURRENT ELEMENTS
Connect the current sensors set to the electrical network according with the
following drawing. The current sensors set can be rigid or flexible. Configure the
PowerNET P-600 for "Elements: 3 CT's".
PowerNET P-600
Electrical network
Illustrative picture
Installing and Operating Manual
110
Publicidad
