Publicidad
Idiomas disponibles
Idiomas disponibles
v To enter in the event configuration press the key F3.
v To cancel one event press the key F6.
When entering in configuration it will show a screen with the maximum and minimum of
phase1:
v Utilize the increase or decrease keys to define the variable value.
v To confirm and go to the next parameter press F3.
v To leave press F6.
In the memory screen a reading equal to "Prog. Event" indicates that the
PowerNET P-600 is configured to start the registries by tension event. When the
equipment stops registering, the events are canceled remaining the values previously
configured. To start a new event with the same values it's just enter in the event
configuration and leave.
6.5. CALENDAR
This function configures the PowerNET P-600 calendar. Press the key
F0 to activate the second function, when the display shows the letter f at the lower right
corner press F5. When the screen below is showed:
TN
Ajuste = Adjust
Terca = Tuesday
v Utilize the increase or decrease keys to adjust the calendar parameter value
v To confirm and go to the next parameter press F5.
v To leave press F6.
6.6. DATA REGISTRY START AND END
This function configures the PowerNET P-600 to start and stop the memory
registries at a predetermined date. Press the key F0 to activate the second function,
PowerNET P-600
Installing and Operating Manual
120
Publicidad
