Identification Of Manufacturer And Appliance; Procedure For Requesting Service - Angelo Po 0N0FAA Manual De Uso

ENGLISH

IDENTIFICATION OF MANUFACTURER AND APPLIANCE

The nameplates shown here are fi tted directly
to the appliance.
One (fi g.1) contains references and all essen-
tial information for operating safety, and the
other (fi g.2) provides gas information for each
country of use.
Appliance model
A)
Type of customisation
B)
Manufacturer's nameplate
C)
Type of fume exhaust vent
D)
Serial number
E)
Protection rating
F)
CE marking of conformity
G)
Reference standard
H)
For all requirements contact the agents or the
headquarters of Angelo Po which can be found
in the contacts section of the website http://
www.angelopo.com.
14

PROCEDURE FOR REQUESTING SERVICE

GENERAL INFORMATION
CE marking
L)
Product family type
M)
Gas pressure
N)
Appliance category
P)
Gas consumption
Q)
Rated power (kW)
R)
Gas type
S)
Code of country of destination
U)
Date of construction
V)
Voltage (V)
W)
Frequency (Hz)
X)
Rated power (kW)
Y)
Injector diameter
Z)
When requesting after-sales service, sta-
te the data provided on the nameplate (see
"equipment and manufacturer identifi cation" in
the oven manual) and the type of fault noticed.
3319961_ut_GB_rev.1