antennas) at least 30 cm away from all device parts, in-
cluding all cables included in delivery.
• Failure to comply with the above can impair the perfor-
mance of the device.
5. DEVICE DESCRIPTION
The associated drawings are shown on page 3.
Cuff
1
Cuff connector
3
Memory buttons M1/
5
M2
Risk indicator
7
Information on the display
Time/date
9
Diastolic pressure
11
Cardiac arrhythmia
13
symbol
User memory
15
Cuff line
2
Display
4
6
START/STOP button
Connection for cuff con-
8
nector (left-hand side)
Systolic pressure
10
Calculated pulse value
12
Pulse symbol
14
Risk indicator
16
Number of memory
17
space/memory display
for average value ( ),
morning (
),
evening (
)
6. USAGE
6.1 Initial use
Inserting the batteries
• Remove the battery compartment cover on the back of
the device
.
A
• Insert the batteries (see chapter "Technical specifica-
tions"). Insert the batteries, making sure the polarity is
correct according to the label
• Close the battery compartment cover.
If the
symbol is displayed and does not disappear,
measurement is no longer possible. Replace all the batteries.
Once the batteries have been removed from the device, the
date and time must be set again. Any saved measured values
are retained.
32
Release air (arrow)
18
Battery display symbol
19
Symbol for Bluetooth
®
20
transfer
.
A