Beurer BM 54 Manual De Instrucciones página 33

Adjusting the settings
Make sure that the device's settings have been set correctly
so you can make full use of all its functions. Otherwise you
will not be able to save your measured values with the date
and time and access them later.
There are two different ways to access the settings menu:
• Before initial use and after each time you replace the
battery:
When inserting batteries into the device, you will be tak-
en to the relevant menu automatically.
• If the batteries have already been inserted:
With the device switched off, press and hold the START/
STOP button for approx. 5 seconds.
Set these settings in the order shown below:
Hour format ➔ Date ➔
Press to confirm your selection each time.
Time format
Time format flashes:
• Press M1/M2 to select the time format
®
Time ➔ Bluetooth
33
Date
The year flashes:
• Press M1/M2 to select the year
The month flashes:
• Press M1/M2 to select the month
The day flashes:
• Press M1/M2 to select the day
If the time format is set to the 12-hour format, the
order in which the day and month are displayed is
reversed.
Time
The hour flashes:
• Press M1/M2 to select the hour
The minutes flash:
• Press M1/M2 to select the minutes
Bluetooth ®
The Bluetooth ® symbol flashes on the display.
• Press M1/M2 to select whether automatic Bluetooth
data transfer is activated or deactivated and confirm this
by pressing .
Bluetooth ® data transfers will shorten the battery life.
®