Beurer BM 54 Manual De Instrucciones página 38

Average value
Bluetooth ® activated in the display: Measurement data is
transferred automatically.
flashes:
The average value of all this user's saved measured values
is displayed.
1. Press M1/M2.
flashes:
The average value of the morning measurements for the last
7 days is displayed (morning: 5:00–9:00).
2. Press M1/M2.
flashes:
The average value of the evening measurements for the last 7
days is displayed (evening: 18:00–20:00).
Individual measured values
1. If you press M1/M2 again, the last individual measure-
ment is displayed.
2. If you press M1/M2 again, you can view the individual
measured values.
3. Press to switch the device off again.
Press to exit the menu.
Deleting measured values
1. To delete all of a user's measured values, select the cor-
responding user.
Start the retrieval of the average measured values.
flashes on the display, the average value of all this us-
er's saved measured values is displayed.
2. Press and hold the memory button M1 or M2 for 5 seconds
depending on the user memory you are in.
appears on the display. All this user's values are
deleted.
Deleting individual measurements
1. To clear individual measurements from the relevant user
memory, you must first select a user memory.
2. Start the retrieval of the individual measured values.
3. Press and hold the memory button M1 or M2 for 5 seconds
(depending on the user memory you are in).
4. The selected value is deleted. The device briefly displays
.
5. If you would like to delete other values, repeat the process
described above.
You can switch off the device at any time by pressing
the START/STOP button
38
.