Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
The position of the signs provided is shown in
the picture.
Manufacturer and appliance nameplate.
A)
WARNING: read the manual carefully
B)
before carrying out any procedure.
WARNING: when washing the appli-
C)
ance, do not point pressurised water jets at
internal parts.
WARNING: draws attention on com-
D)
pliance with the rules. "Install in compliance
with the applicable regulations and use in well
ventilated premises only".
WARNING: draws the attention on
E)
compliance with the rules. "The Manufacturer
declines all liability in case of failure to com-
ply with the installation and commissioning
instructions".
WARNING: watch out for hot surfaces.
F)
HAZARDS AND SAFETY PROVISIONS DURING TRANSPORT
During transport of the appliance, watch out for the following hazards and provide for the counter-
measures indicated below:
► Source of hazard: Handling of heavy loads
Hazard
Risk of injury due to
body overload
4
SAFETY AND INFORMATION SIGNS
Where or in which situations
does the hazard occur?
• When
the
appliance
moves
E
D
F
37M3202
C
B
CE Marking: indicates that the equipment is
G)
compliant with all relevant laws applicable to
the product.
WEEE symbol: indicates that the appliance is
H)
subject to specifi c waste disposal regulations.
Countermeasures
• Use a suitable lifting
device
• Observe
the
values for lifting and
transport
• Wear personal protec-
tive equipment
SAFETY
A
H
Safety device
• Protective gloves
• Protective shoes
limit
• Safety
helmet
(e.g.
for
pended
loads,
overhead opera-
tions...)
3395250_ut_GB
G
sus-
Publicidad
