Angelo Po 0S0VTR Manual De Uso página 29

SAFETY
► Source of hazard: Appliance mechanics
Hazard
Risk of crushing
parts of the body in
case of tip-over or
fall of the appliance
HAZARDS AND SAFETY PROVISIONS DURING ASSEMBLY
► Source of hazard: Handling of heavy loads
When assembling the appliance, watch out for the following hazards and provide for the counter-
measures indicated below:
Hazard
Risk of injury due
to body overload
3395250_ut_GB
Where or in which situations
does the hazard occur?
• When the appliance
moves
Where or in which situations
does the hazard occur?
• When the appliance
moves
Countermeasures
• Use a suitable lifting
device
• Pay attention to the
centre of gravity
• Avoid collisions
Countermeasures
• Use a suitable lifting de-
vice to place the appliance
on the work bench, on the
base
• Adjust the position only if
a suitable number of peo-
ple is available, otherwise
observe the limit values for
lifting and transport
• Comply with the applica-
ble laws on accident pre-
vention for the installation
place
• Wear personal protective
equipment
ENGLISH
Safety device
• Protective gloves
• Protective shoes
• Safety helmet (e.g.
for suspended
loads, overhead
operations...)
Safety device
• P r o t e c t i v e
gloves
• Protective shoes
• Safety helmet
(e.g. for sus-
pended loads,
overhead oper-
ations...)
5