LG W09TI Manual De Instalación página 12

SELECTING THE INSTALLATION PLACE
Indoor Unit
• Install the indoor unit on a strong wall that is not
subject to vibrations.
• The in let and outlet ports should not be
obstructed: the air should be able to blow all over
the room.
• Do not install the unit near a source of heat,
steam, or flammable gas.
• Install the unit near an electric socket or private
circuit.
• Do not install the unit where it will be exposed to
direct sunlight.
• Select a site where the condensed water can
be easily drained out, and where it is easily
connected to outdoor unit.
• Check the machine operation regularly and
reserve the necessary spaces as shown in the
picture.
• Select a place where the filter can be easily taken
out.
1 5 0
Mounting plate
Condensed water drain pipe
Sleeve
Insulating covering
Electrical cable
Water drain pipe
12
1 5 0
minimum space to be
reserved (mm) showing in
the picture
Outdoor Unit
• Do not install the outdoor unit near sources of
heat, steam or flammable gas.
• Do not install the unit in too windy or dusty places.
• Do not install the unit where people often pass.
Select a place where the air discharge and
operating sound will not disturb the neighbours.
• Avoid installing the unit where it will be exposed
to direct sunlight (other wise use a protection, if
necessary, that should not interfere with the air
flow).
• Reserve the spaces as shown in the picture for
the air to circulate freely.
• Install the outdoor unit in a safe and solid place.
• If the outdoor unit is subject to vibration, place
rubber gaskets onto the feet of the unit.
3 0 0
EN
minimum space to be
reserved (mm) showing in
the picture