Descargar Imprimir esta página

CASO DESIGN Beer Master Manual Del Usuario página 11

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 67
PLEASE NOTE
 Defective components must always be replaced with original repla-
cement parts. Only such parts will guarantee that the safety require-
ments are ful lled.
 Use the appliance only as described in the user's guide to avoid possi-
ble injury from misuse.
 Do not use the appliance:
• if the appliance itself or parts are damaged,
• if the power cord or plug is damaged,
• if the appliance has been dropped.
 Always unwind the power cord completely before use. When doing so,
ensure the power cord is not damaged by sharp edges or hot objects.
 Do not make any modi cations to the appliance or the power cord.
Only have repairs carried out by a specialist workshop, as appliances
that have not been repaired properly endanger the user. Please also
observe the enclosed warranty conditions.
 Only use the appliance with original accessories.
 The dispenser should not be used to cool other liquids and beverages.
 Do not expose this device to rain or other environmental conditions.
 Do not remove the keg from the dispenser until it is completely empty.
 Do not remove the CO pressure cartridge until it is empty.
 To avoid unintended start-up of the dispenser, make sure that the on/
o switch is turned to "O " before you connect to it to a power source.
 Leaving the door open for a longer period of time may result in a
signi cant temperature increase in the dispenser chamber.
 Before you insert a keg, make sure that it is not damaged and that its
use-by date has not expired.
 Pre-cool the beer keg before you use it. Do not put the keg in a freezer
to do this.
 Do not shake the keg before you use it.
 Do not expose the keg to direct sunlight. The keg must be stored as
per the instructions on its label.
CASO Beer Master
11

Publicidad

loading

Este manual también es adecuado para:

00582