Bose SOUNDBAR 550 Manual De Instrucciones página 5

Low-power Radio-frequency Devices Technical Regulations
Without permission granted by the NCC, any company, enterprise, or user is not allowed to
change frequency, enhance transmitting power or alter original characteristic as well as
performance to an approved low power radio-frequency devices. The low power radio-frequency
devices shall not influence aircraft security and interfere legal communications; If found, the
user shall cease operating immediately until no interference is achieved. The said legal
communications means radio communications is operated in compliance with the
Telecommunications Management Act. The low power radio-frequency devices must be
susceptible with the interference from legal communications or ISM radio wave radiated devices.
Product Power State Table
The product, in accordance with the Ecodesign Requirements for Energy Related Products
Directive 2009/125/EC and the Ecodesign for Energy-Related Products and Energy Information
(Amendment) (EU Exit) Regulations 2020, is in compliance with the following norm(s) or
document(s): Regulation (EC) No. 1275/2008, as amended by Regulation (EU) No. 801/2013.
Required Power State Information
Power consumption in specified power mode, at
230V/50Hz input
Time after which equipment is automatically switched
into mode
Power consumption in networked standby if all wired
network ports are connected and all wireless network
ports are activated, at 230V/50Hz input
Wireless network port activation/deactivation
procedures. Deactivating all networks will enable
standby mode.
Please dispose of used batteries properly, following local regulations. Do not incinerate.
REGU L ATORY AND L EGA L I NFO RM ATIO N
Standby
< 0.5 W
< 2.5 hours
N/A
Wi-Fi®: Activate using the Bose app.
Deactivate by pressing and holding the Mute
and Bluetooth buttons on the
remote simultaneously.
Bluetooth®: Activate by pairing with a Bluetooth
source by pressing the Bluetooth button on
the remote then selecting the soundbar in your
mobile device Bluetooth list or by using the Bose
app. Deactivate by clearing the pairing list by
pressing and holding the Bluetooth button on
the remote for 10 seconds.
|
5 E N G
Power Modes
Networked Standby
all network types <
2.0 W
< 20 minutes
< 2.0 W