Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
Steam gushes from
steam release vent
when Steam Release
switch is in Seal position
Display remains blank
after connecting the
power cord
Occasional clicking or
light cracking sound
Error code appears
on display and cooker
beeps continuously
Cause
Not enough liquid in the
inner pot
Pressure sensor
control failure
Internal steam release
valve not seated properly
Bad power connection
or no power
Cooker's electrical fuse
has blown
The sound of power
switching and expanding
pressure board when
changing temperatures
Bottom of the inner
pot is wet
There is an issue with
the cooker
42
User Manual
Solution
• Add thin, water-based
liquid to the inner pot
according to its size:
5.7L
(12 oz / 375 mL)
7.6L
(16 oz / 500 mL)
• Contact Consumer Care.
• Check Steam Release
switch to ensure it's
set to Seal.
• Inspect power cord for
damage. If damage is
noticed, contact
Consumer Care.
• Check outlet to ensure it
is powered.
• Contact Consumer Care.
• This is normal; no
action needed.
• Wipe exterior surfaces of
inner pot. Ensure heating
element is dry before
inserting inner pot into
cooker base.
• Read "Error Codes" for
instructions.
Publicidad
