Publicidad
Idiomas disponibles
Idiomas disponibles
5 : Emulsifying/beating/whipping
ACCESSORIES USED:
• Bowl assembly
EN
(c)
• Spindle
.
• Emulsifying disc
FITTING THE ACCESSORIES:
• Place the bowl
• Slide into place and lock the emulsifying disc
the assembly on the motor drive output
• Place the ingredients in the bowl.
• Position the lid
• To remove the bowl-lid assembly: unlock the lid then unlock the bowl.
USAGE AND TIPS:
• Turn the speed selector
• Never use this accessory to knead heavy dough or to mix cake mixtures.
You can prepare: mayonnaise, aïoli, sauces, egg whites (1 to 6), whipped cream, chantilly cream (up to 0,2 litres).
ACCESSORIES USED:
• Jug blender assembly
FITTING THE ACCESSORIES:
• Place the ingredients in the blender jug
(h2)
• Fit the lid
• Position the assembled jug
• Wait for the appliance to come to a complete stop before removing the blender jug from the motor drive.
USAGE AND TIPS:
• Turn the speed selector
You can use the Pulse postion for better control of mixing.
• Never fill the blender jug with boiling liquid.
• Never use the blender jug for dry products (nuts, almonds, peanuts, etc.).
• Always use your blender jug with the lid on.
• Pour all liquid ingredients into the jug first before adding the solid ingredients, without exceeding the
maximum level shown:
- 1 l for thick mixtures.
- 0.8 l for liquid mixtures.
• To add ingredients during mixing, remove the feeder cap
the filling hole without exceeding the filling level shown on the jug.
Maximum usage time: 3 min.
Tips:
• During mixing, if the ingredients get stuck to the sides of the jug, switch off the appliance and unplug it.
Remove the blender jug assembly from the main body of the appliance. Use the spatula to push the
preparation down onto the blade. Never put your hands or fingers into the jug or near the blade.
You can:
• Prepare extra smooth soups, sauces, stewed fruit, milk-shakes and cocktails.
• Blend batters (pancakes, doughnuts, fritters, cake).
(b)
.
(e)
.
(b3)
on the motor drive
(b2)
and lock in on the bowl
(a3)
to position 2 to start.
6 : Liquidising/blending/mixing very finely
(h)
.
(h1)
, with the feeder cap
(h)
on the motor drive output
(a3)
to position 1 or 2 to start up.
(a)
and lock it in place.
(e)
on the spindle
(a1)
.
(b3)
.
(h3)
without exceeding the maximum level shown on the jug.
, and lock it onto the jug.
(a2)
, with the jug handle facing towards you.
(h1)
from the lid and pour the ingredients through
14
(c)
, and position
Fit the emulsifying
disc in the right
direction: see inset
drawing 5.
(depending on model)
Publicidad
