Publicidad
Idiomas disponibles
Idiomas disponibles
Introduction
Introduction
Congratulations on the purchase of your
new appliance.
You have selected a high-quality
product. The operating manual is a part
of this product It contains important information
regarding safety, use and disposal. Familiarize
yourself with all operating and safety information
before using the product. Use the product only as
described and for the application ranges indicat-
ed. When transferring the product to a third party,
all documents must be delivered to the third party
together with the product.
This document constitutes the complete operating
instructions. By scanning the QR code, you will be
transferred directly to the Lidl Service webpage
(www.lidl-service.com) where, by entering the
item number IAN 436523_2304, you will be
able to examine and download these operating
instructions.
Proper Use
This appliance is intended to be used in a do-
mestic setting to chop up and grind rough, clod-
strewn soil and to incorporate manure, peat and
compost. This is a garden technology appliance.
The appliance is for private use only and is not
intended for commercial use.
Distribution package
After unpacking, always check immediately to
ensure that the distribution package is complete
and that the appliance is in flawless condition.
1 petrol garden tiller
4 nuts M8 and screws M8x30 with spring washer
and flat washer (10 pre-installed on the handle-
bar mount)
1 nut and screw M6x35 (pre-installed)
1 bag containing assembly material
- Screw M8x30 with spring washer and flat
washer
- Large diameter washer M8
- Screw M8x20 with washer and spring washer
(6x)
- Safety retaining pin (4x)
- Handlebar bridge
- Open-end wrench SW10 & 13 (2x)
28 GB/IE/NI/CY/MT
- Spark plug wrench incl. tommy bar
1 depth stop
1 fender flare left
1 fender flare right
2 blade extension
2 blade guard
1 operating manual motor
Part description
Pull starter
1
Handlebar right
2
Accelerator
3
Adjusting device for the clutch
4
Coupling lever
5
Clutch lever brake
6
Handle
7
Handlebar left
8
Handlebar bridge
9
Handlebar mount
10
Fuel tank cover
1 1
Fuel tank
12
Primer
13
Fender flare left
14
Blade
15
Blade extension
16
Blade guard
17
Spark plug
18
Spark plug connector
19
Exhaust pipe
20
Spring wheel locking mechanism
21
Transport wheel
22
Fender flare right
23
Oil drain plug
24
Oil filler plug with oil dipstick
25
Depth stop
26
Safety bracket
27
Carburetor
28
Screw M8x30 with spring washer and flat
29
washer
Large diameter washer M8
30
Screw M6x35 and nut for depth stop
31
Locking nut M8
32
Screw M8x20 with spring washer and flat
33
washer
Publicidad
